Thiết bị giám sát phân tích hiệu suất - PM180

Environmental Conditions

Operating Temperature:

-30°C to 70°C (-22°F to 158°F)

Storage Temperature:

-40°C to 85°C (-40°F to 185°F)

Humidity:

0 to 95% non-condensing

Altitude

≤ 2000m

Construction

Overall Dimensions

Width:

220.00 mm (8.66 Inches)

Height:

152 mm (5.98 Inches)

Depth:

210.00 mm (8.26 Inches)

Weight:

2.5kg (5.51 Lb)

Materials

Enclosure:

Polycarbonate

Panels:

Polycarbonate

PCB. :

FR4 (UL94-V0)

Terminals:

PBT (UL94-V0)

Connectors-Plug-in type:

Polyamide PA6.6 (UL94-V0)

Packaging Case:

Carton and Stratocell (Polyethylene Foam) Brackets

Labels:

Polyester film (UL94-V0)

Power Supply

Main Power Supply

Withstanding Insulation:

4kV AC @ 1mn

AD/DC Power Supply (standard):

L/+, N/- and GND

Rated input:

50-290VAC 50/60 Hz, 90-290VDC, Maximum Power 10W

Wire Size:

up to 10 AWG (up to 6 mm2 )

Terminals Pitch 7.5 mm, three pins

Auxiliary Power Supply (module)

Withstanding Insulation:

4kV AC @ 1mn

AC/DC Power Supply:

L/+, N/- and GND

Rated input:

50-290VAC 50/60 Hz, 40-290VDC, Maximum Power 20W

Low DC/DC Power Supply (module option):

(+), (-) and GND

12/24 VDC Option:

Rated input 9.6-35 VDC, Maximum Power 20W

Wire Size:

up to 10 AWG (up to 6 mm2 )

Terminals Pitch 7.5 mm, three pins

Input Ratings

AC Voltage Inputs: V1, V2, V3, VN

PM180-N1 model

Measuring range:

57/100 – 400/690 VAC PM180-N1 to N3 model only

Direct input and input via PT (up to 576VAC line-to-line, up to 335VAC line-to-neutral)

Input Impedance:

> 1 MW

Burden for 400V:

< 0.2 VA

Burden for 277V:

< 0.1 VA

Burden for 120V:

< 0.02 VA

PM180 model

Measuring range:

57/100 – 277/480 VAC

Direct input and input via PT (up to 576VAC line-to-line, up to 335VAC line-to-neutral)

Burden for 277V:

< 0.76 VA

Burden for 120V:

< 0.144 VA

Overvoltage Withstand:

1000VAC continuous, 2500VAC for 1 second

Galvanic Isolation, withstanding insulation:

4kV AC @ 1mn

Wire Size:

up to 10 AWG (up to 6 mm2 )

Terminals Pitch

7.5 mm

AC/DC Voltage Input: V4, Vref

Operating Range:

400VAC

Direct input and input via PT (up to 480VAC) or Battery input

Input Impedance:

> 10 MW

Burden for 400V:

<< 0.01 VA

Burden for 120V:

<< 0.01 VA

Overvoltage Withstand:

1000VAC continuous, 2500VAC for 1 second

Resistive Isolation, withstanding Insulation:

4kV AC @ 1mn

Wire Size:

10 AWG (up to 6 mm2 )

Terminals Pitch:

7.5 mm

AC Transient Voltage Inputs: V1, V2, V3, VN, VG (TRANSIENT RECORDER module)

Measuring range:

up to 2kV AC

High impedance input:

10 MW, withstanding insulation: 4kV AC @ 1mn

Wire Size:

up to 10 AWG (up to 6 mm2 )

Terminals Pitch

7.5 mm

AC Current Inputs:

Standard: I1, I2, I3, I4

Input via Internal CT with 5A secondary

Operating range:

maximum continuous 10A/20A RMS (ANSI C12.20 and IEC 62053-22)

Nominal measured Current:

In = 5A RMS

Fault measured Currents:

up to 50A RMS (10 x In) – without DFR module

Burden:

< 0.15 VA

Overload Withstand:

50A RMS continuous, 250A for 1 second

Wire Size:

10 AWG (2.5 to 6 mm2 )

Terminals Pitch:

9.5 mm

Input via Internal CT with 1A secondary

Operating Range:

continuous 4A RMS (ANSI C12.20) or 2A RMS (IEC 62053-22)

Nominal measured Current:

In = 1A RMS

Fault measured Currents:

up to 10A RMS

Burden:

< 0.02 VA

Overload Withstand:

10A RMS continuous, 50A for 1 second

Wire Size:

10 AWG (2.5 to 6 mm2 )

Terminals Pitch:

9.5 mm

Input via SATEC HACS 100A with 40mA secondary

Operating range:

maximum continuous 10A/20A RMS (ANSI C12.20 and IEC 62053-22)

Nominal measured Current:

5A RMS

Fault measured Currents:

up to 100A RMS (20 x In)

Burden:

< 0.15 VA

Overload Withstand:

100A RMS continuous, 250A for 1 second

Wire Size:

10 AWG (2.5 to 6 mm2 )

Terminals Pitch:

9.5 mm

Fault Current Inputs:

Optional DFR Module: I1x, I2x, I3x, I4x – 40 x In maximum measured fault current

Input via SATEC HACS 200A with 40mA secondary

Fault measured Currents:

up to 200A RMS @ In = 5A (40 x In)

Burden:

< 0.15 VA

Overload Withstand:

200A RMS continuous, 1000A for 1 second

Wire Size:

10 AWG (2.5 to 6 mm2 )

Terminals Pitch:

9.5 mm

Plug-In I/O Ratings

Digital Inputs – 16 Inputs (up to 3 Modules)

Scan time:

1 ms @ 60Hz, 1.25 ms @ 50Hz.

16 optically isolated, dry contact sensing (voltage-free):

Internal power supply 24 VDC

Sensitivity:

open @ input resistance >16kOhm, closed @ input resistance <10kOhm

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

16 optically isolated, wet contact sensing:

External Power Supply:

24 VDC

Sensitivity:

open @ input resistance >16kOhm, closed @ input resistance <10kOhm

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

16 optically isolated, wet contact sensing:

External Power Supply:

48 VDC

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

16 optically isolated, wet contact sensing:

External Power Supply:

125 VDC

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

16 optically isolated, wet contact sensing:

External Power Supply:

250 VDC

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

Relays - 8 Outputs (up to 3 Modules)

8 relays -SPSTForm A

Contact rating:

8A @ 250V AC, 5A @ 30V DC 0.25A @ 250V DC (sw. Volt.) 5A 24V DC (sw. Cur.)

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

3.81 mm

Update time:

1/2 cycle

Analog I/O – 4 Inputs, 4 Outputs (up to 3 Modules)

4 Analog Inputs:

Ranges (upon order):

±1 mA (100% overload)

0-20 mA

4-20 mA

0-1 mA (100% overload)

Accuracy:

0.5% FS

Scan time:

2 cycles

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

5 mm

4 Analog Outputs:

Ranges (upon order):

±1 mA, maximum load 10 kW (100% overload)

0-20 mA, maximum load 510 W

4-20 mA, maximum load 510 W

0-1 mA, maximum load 10 k W (100% overload)

Accuracy:

0.5% FS

Update time:

2 cycles

Wire Size:

12 AWG (up to 2.5 mm2 )

Terminals Pitch:

5 mm

Communication Ports

COM1 (CPU)

Serial EIA RS-232/485 optically isolated port

Withstanding Insulation:

4kV AC @ 1 mn

Connector Type:

removable, captured-wire, 4 terminals.

Wire Size:

up to 12 AWG (up to 2.5 mm2 ).

Baud Rate:

up to 115,200 bps.

Supported Protocols:

MODBUS RTU/ASCII, DNP 3.0

COM2 (Communication Module)

Serial EIA RS-422/RS-485 optically isolated port

Withstanding Insulation:

4kV AC @ 1 mn

Connector type:

removable, captured-wire, 5 terminals.

Wire Size:

up to 12 AWG (up to 2.5 mm2 ).

Baud Rate:

up to 115,200 bps.

Supported Protocols:

MODBUS RTU/ASCII, DNP 3.0

COM3 (Display Communication port)

Serial EIA RS-485 optically isolated port for the RDM.

Withstanding Insulation:

2.5kV AC @ 1 mn

Connector Type:

DB15

Baud Rate:

up to 115,200 bps.

Supported Protocols:

MODBUS RTU/ASCII, DNP 3.0

USB Port (CPU)

Isolated USB 1.1 port.

Withstanding Insulation:

4kV AC @ 1 mn

Connector Type A male, standard USB cable, max. Length 2 meters

Supported protocols:

MODBUS RTU

Ethernet Port (CPU)

Transformer-isolated 10/100Base-T port

Withstanding Insulation:

4kV AC @ 1 mn

Connector Type:

RJ45 modular

Supported Protocols:

MODBUS TCP (Port 502), DNP 3.0/TCP (Port 20000), IEC 61850

Number of simultaneous connections (sockets):

5

ETH2 - 10/100 TX- 100 FX (Communication Module)

Transformer-isolated 10/100Base-T port

Connector Type TX port:

RJ45 modular

Optical-isolated 100Base FX

Connector Type FX port:

SC

Supported Protocols:

MODBUS TCP (Port 502), DNP 3.0/TCP (Port 20000), IEC 61850

Number of simultaneous connections (sockets):

5

COM5 - CELLULAR (Communication Module)

2G/3G CELLULAR MODEM

Withstanding Insulation:

2.5kV AC @ 1 mn

Connector type:

SMA

Supported Protocols:

MODBUS TCP (Port 502), DNP 3.0/TCP (Port 20000)

Infrared (RGM180) Optional optical IEC/ANSI head

Baud Rate:

up to 115,200 bps.

Supported Protocols:

MODBUS RTU/ASCII, DNP 3.0

Real-time Clock

Accuracy: maximum error 5 seconds per month @ 25°C

IRIG-B

Recommended cable:

51Ohm low loss - RG58A/U (Belden 8219 or equivalent), TNC connector

Recommended GPS time code generator:

Masterclock GPS-200A

CPU Board (PM180 – N3 version)

Optically isolated IRIG-B port

Withstanding Insulation:

4kV AC @ 1 mn

Time code signal:

non-modulated (pulse-width coded).

Level:

unbalanced 5V.

Connector type:

removable, captured-wire, 4 terminals

Communication Module

Optically isolated IRIG-B port

Withstanding Insulation:

4kV AC @ 1 mn

Time code signal:

non-modulated (pulse-width coded).

Level:

unbalanced 5V.

Connector Type:

BNC.

Log Memory

Standard onboard memory:

250 Mbytes.

Remote Display Module

RDM180 (PM180-D model)

Display:

high-brightness seven-segment digital LEDs, two 4-digit windows and one 6-digit windows

Keypad:

6 push buttons

Communication:

EIA RS-485 port with 12V supply voltage

Connector Type:

DB15

Wires Size:

up to 12 AWG (up to 2.5 mm2 )

Distance:

3m cable (10 feet)

up to 500m (2000 feet) with external 12VDC power supply

RDM312 (PM180-M model)

Display:

high-brightness seven-segment digital LEDs, nine 4-digit windows and three 6-digit windows

Keypad:

7 push buttons

Communication:

EIA RS-485 port with 12V supply voltage

Connector Type:

DB15

Wires Size:

up to 12 AWG (up to 2.5 mm2 )

Distance:

up to 500m (2000 feet) with external 12VDC power supply

RGM180 (PM180-G)

5.7 Inch Touch-Panel LCD graphic TFT display

Resolution:

320 x 240

Operating temperature:

-20°C - +70 °C

Communication:

EIA RS-485 port with 12V supply voltage

Connector Type:

DB15

Wires Size:

up to 12 AWG (up to 2.5 mm2 )

Distance:

up to 500m (2000 feet)

10/100Base T ETHERNET port with 12 V supply voltage and PoE (Power over ETHERNET)

Connector Type:

RJ-45 and DB15 (for 12VDC external Power Supply connection)