đồng hồ giám sát điện áp hiển thị số - RDM312
Model: RDM312
Nhà sản xuất: SATEC
Xuất xứ: Isarel
The RDM 312 is multi-window display module used in various SATEC devices, including PM17X, PM180 and ezPACTM.
It has 12 ultra-bright 4 to 6 digits, 14mm high high LED display that are easily readable from a distance for a quick overview.
Environmental Conditions | Operating temperature: | -20°C to 60°C (-4°F to 140°F) |
Storage temperature: | -25°C to 80°C (-13°F to 176°F) | |
Humidity: | 0 to 95% non-condensing | |
Construction | Weight: | 1.23kg (2.7 lb.) |
Materials | Case enclosure: | plastic PC/ABS blend |
Display body: | plastic PC/ABS blend | |
Front panel: | plastic PC | |
PCB.: | FR4 (UL94-V0) | |
Terminals: | PBT (UL94-V0) | |
Connectors-Plug-in type: | Polyamide PA6.6 (UL94-V0) | |
Packaging case: | Carton and Stratocell® (Polyethylene Foam) brackets | |
Labels: | Polyester film (UL94-V0) | |
Power Supply | 120/230 VAC-110/220 VDC Option: | Rated input 85-264VAC 50/60 Hz, 88-290VDC, Burden 10W |
Isolation: | Input to output: 3000 VAC Input to ground: 2000 VAC | |
12 VDC Option: | Rated input 9.6-19 VDC | |
24 VDC Option: | Rated input 19-37 VDC | |
48 VDC Option: | Rated input 37- 72 VDC | |
Wire size: | up to 12 AWG (up to 3.5 mm2 ) | |
Input Ratings |
|
|
Voltage Inputs | Operating range: | 690VAC line-to-line, 400VAC line-to-neutral |
Direct input and input via PT (up to 828VAC line-to-line, up to 480VAC lineto-neutral) | ||
Input impedance: | Input impedance: | |
Burden for 400V: | < 0.4 VA | |
Burden for 120V: | < 0.04 VA | |
Overvoltage withstand: | 1000 VAC continuous, 2000 VAC for 1 second | |
Galvanic isolation: | 3500 VAC | |
Wire size: | up to 12 AWG (up to 3.5mm2 ) | |
Current Inputs | Wire size: | 12 AWG (up to 3.5 mm2 ) |
Galvanic isolation: | 3500 VAC | |
5A secondary | Operating range: | continuous 10A RMS Burden: < 0.1 VA |
Overload withstand: | 15A RMS continuous, 300A RMS for 1 second | |
1A secondary | Operating range: | continuous 2A RMS Burden: < 0.02 VA |
| Overload withstand: | 6A RMS continuous, 80A RMS for 1 second |
Relay Outputs | Wire size: | 14 AWG (up to 1.5 mm2 ) |
2 relays rated at 3A/250 VAC; 3A/30 VDC, 2 contacts (SPST Form A) | Galvanic isolation: | Between contacts and coil: 2000 VAC 1 min Between open contacts: 1000 VAC |
Operate time: | 10 ms max. | |
Release time: | 5 ms max | |
Update time: | 1 cycle | |
Digital Inputs | Sensitivity: | Open @ input resistance >100 kOhm, Closed @ Input resistance < 100 Ohm |
2 Digital Inputs Dry Contacts | Wire size: | 14 AWG (up to 1.5 mm2 ) |
Galvanic isolation: | 2000V RMS | |
Internal power supply | 15V | |
Scan time: | 1 ms | |
Optional Analog Inputs | Ranges (upon order): | ±1 mA (100% overload) - Input resístanse 1.2 kOhm 0-20 mA - Input resístanse 250 Ohm 4-20 mA - Input resístanse 250 Ohm 0-1 mA (100% overload) - Input resístanse 2.4 kOhm |
2 Analog Inputs (optically isolated) | Wire size: | 14 AWG (up to 1.5 mm2 ) |
Isolation: | 2,000 V RMS | |
Accuracy: | 0.5% FS | |
Scan time: | 1 cycle | |
Optional Analog Outputs | Ranges (upon order): | ±1 mA, maximum load 5 kΩ (100% overload) 0-20 mA, maximum load 510 Ω 4-20 mA, maximum load 510 Ω 0-1 mA, maximum load 5 k Ω (100% overload) |
2 Analog Outputs (optically isolated) | Isolation: | 2,000 V RMS |
Power supply: | internal | |
Accuracy: | 0.5% FS | |
Wire size: | 14 AWG (up to 1.5 mm2 ) | |
Update time: | 1 cycle | |
Communication Ports |
|
|
COM1 (Optional modules) |
|
|
Serial EIA RS-232 optically isolated port | Isolation: | 2,000 V RMS |
Connector type: | DB9 female. | |
Baud rate: | up to 115.2 kbps | |
Supported protocols: | Modbus RTU, DNP3, and SATEC ASCII. | |
RS-422/RS-485 optically isolated port | Isolation: | 2,000 V RMS |
Connector type: | DB9 female. | |
Supported protocols: | Modbus RTU, DNP3, and SATEC ASCII. | |
Ethernet Port | Connector type: | RJ45 modular. |
Transformer-isolated 10/100BaseT Ethernet port. | Supported protocols: | Modbus/TCP (Port 502), DNP3/TCP (Port 20000), GE EGD producer. |
Number of simultaneous connections: | 4 (4 Modbus/TCP or 2 Modbus/TCP + 2 DNP3/TCP). | |
Dial-up Modem Transformer-isolated internal 56K modem. | Connector type: | RJ11. |
Supported protocols: | Modbus RTU, DNP3, and SATEC ASCII. | |
Profibus DP (IEC 61158) RS-485 optically isolated Profibus interface. | Connector Type: | DB9 female. |
Baud Rate: | 9600 bit/s – 12 Mbit/s (auto detection). | |
32 bytes input, 32 bytes output. | ||
Supported Protocols: | PROFIBUS. | |
COM2 |
|
|
RS-422/RS-485 optically isolated port | Isolation: | 2,000 V RMS |
Connector type: | removable, 5 pins. | |
Wire size: | up to 14 AWG (up to 1.5 mm2 ). | |
Baud rate: | up to 115.2 kbps. | |
Supported protocols: | Modbus RTU, DNP3, and SATEC ASCII. | |
Real-time Clock | Accuracy: | typical error 30 seconds per month @ 25°C |
Log Memory | Onboard memory with battery backup: | 1 Mbytes. |
Display Module | Display: | high-brightness seven-segment digital LEDs, two 4-digit + one 6-digit windows |
Keypad: | 6 push buttons | |
Communication: | EIA RS-485 port with 12V supply voltage | |
Connector type: | DB15, 15 pins | |
Wires size: | up to 14 AWG (up to 1.5 mm2 ) | |
Distance: | up to 1000 m (3200 feet) | |
Supply Voltage: | 12VDC +/- 10% | |
Power consumption: | 2W |
-
Nhằm giúp cho trải nghiệm khách hàng luôn được tối ưu, Patek luôn chú ý đến từng nhu cầu dù nhỏ của khách hàng để hoàn thiện dịch vụ. Cung cấp đủ thông tin, tài liệu kỹ thuật về sản phẩm với ngôn ngữ Anh - Việt theo yêu cầu giúp cho khách hàng có cơ sở để quyết định nhanh chóng trong việc lựa chọn sản phẩm với độ tin cậy, đáp ứng cao cho nhu cầu, ứng dụng.
-
Ngoài ra nếu bạn đăng ký tài khoản trên website, hoặc trở thành khách mua hàng của chúng tôi thì bạn cũng có thể tiếp cận thêm nhiều nguồn tài liệu quý giá và hữu ích dành riêng.
- Trong trường hợp chưa tìm thấy tài liệu đáp ứng nhu cầu, quý khách có thể gửi yêu cầu cụ thể trong phần Hỗ trợ
-
Nếu bạn đã đăng nhập tài khoản vui lòng nhấp vào đây để đi đến phần hỗ trợ tài liệu dành riêng.
I. Tài liệu Tiếng Anh:
II. Tài liệu Tiếng Việt:
Đang cập nhật...