Cable Fault Location UPZ-80-10
XLPE cables sheath tester UPZ-80-10 is designed for testing the sheath of cables made of cross-linked polyethylene (XLPE), as well as preliminary and accurate location of the sheath faults. UPZ-80-10 could be used for transforming the high-resistance defects in signal, control and communication cables.
UPZ-80-10 is a portable monoblock device.
|Single-phase AC power supply voltage, V||220±11|
|Power supply frequency, Hz||50...60|
|Maximum consumed current, A||4|
|Maximum consumed power, kVA||0.750|
|Type of output voltage||AC|
|Maximum output current, mA||1500, 750, 350, 150|
|Output testing voltage, V||500, 1000, 2000, 5000, 10000|
|Reduced error of high voltage measurement, %||±3|
|Reduced error of output current measurement, %||±3|
|Minimum load capacitance, µF||0.1|
|Duty cycle under normal load:|
|- working, h, min||2|
|- not working, h, max||1|
|Net weight, kg, max||25|
|Lifespan, years, avg||10|
The device is designed for indoors operation under the following conditions:
|Air temperature, °С||from -5 to +45|
|Relative humidity, %, up to||80 at +25° С|
|Atmospheric pressure, kPa (mm hg)||84,0 – 106,7 (630 – 800)|
|XLPE sheath tester UPZ-80-10||1|
|High voltage shielded cable (length 4 m)||1|
|Power cable (length 1,8 m)||1|
|Grounding cable (cross-section 6 mm2, length 4 m)||1|
The Manufacturer guarantees UPZ-80-10 conformity with the current technical documentation and the relevant Electrical and Safety codes and standards.
Limited Warranty period is 12 months from the date of shipment of the apparatus to the consumer.