Cable Fault Location SVP-05C
High Voltage burning unit SVP-05C is designed for burning (destroying the soldered joint with resistance close to zero, in the point where a high voltage cable core short circuits to the shell or another core) the defective insulation of power cables, with subsequent afterburning, in order to destroy the contact resistance in the defective point, which allows for subsequent application of the known methods for determining the distance to the fault and fault location directly on the cable track.
|Single-phase AC power supply voltage, V||220±22|
|Power supply frequency, Hz||50±1|
|Maximum output voltage with no load, kV||25|
|The number of working intervals||6|
|The maximum output current under short-circuit for high voltage intervals, A, at least||7|
|Maximum output current for short-circuit for low-voltage interval of "500 V", A, no less||15|
|Longest allowed continuous operation time, min, with load current of:|
|100% of maximum||10|
|70% of the maximum||30|
|Current consumption, A, max||40|
|Average lifespan, years||10|
|Net weight, kg, max||200|
The device is designed for an indoors operation under the following conditions:
|Air temperature, °С||from -10 to +40|
|Relative humidity, %, up to||80 at +25° С|
|Atmospheric pressure, kPa (mm hg)||84,0 – 106,7 (630 – 800)|
|High voltage unit SVP-05C||1|
The Manufacturer guarantees SVP-05C conformity with the current technical documentation and the relevant Electrical and Safety codes and standards.
Limited Warranty period is 12 months from the date of shipment of the apparatus to the consumer.